In this video I demonstrate how I create an encased silver glass bead with tiny raised dots on the surface.

With the right type of flame, the silver in the silver glass is brought to the surface of the bead causing it to develop a slightly metallic sheen. Once I see that sheen I quickly and carefully capture that luster beneath a layer of crystal clear glass.

After encasing, and shaping and smoothing the bead, I apply three rows of alternating dots with a silver glass stringer pulled thin.

It takes a steady hand to get the dots just right! 😀

Once applied, the raised glass dots are spun through the heat of the flame just enough to allow them to melt about half way down. If they were not melted in far enough the dots would be at risk of being popped off when worn. But melting them too far down can cause them to lose their dimension and disappear into the bead altogether. It’s a tricky balance between too much and too little heat.

I hope you enjoy watching me work at the torch! 🙂

Christina
CCGlassArt